C-STAND TIPS FOR FLAT LAY PHOTOGRAPHY

 Let’s talk tips for flat lay photography. The number one piece of equipment that I recommend that you get to improve your flat lay photography is a tripod or a c-stand. But, how do you know whether you should choose a c-stand vs. a tripod…or both, and why are they even important in the first place?

I’ll break it all down for you in this post and tell you why I prefer a c-stand over a tripod for flat lay photography. But, let’s start with a little story…

WHERE I WENT WRONG WITH MY FIRST TRIPOD

I first bought a tripod about a year ago when I began my photography journey. In my excitement, I bought ALL the things. You know, every single piece of gear that I thought made me appear to be a “real” photographer. Tripod? Check. Everything you could possibly think of. Never mind I didn’t know how to use all of the things that I purchased, nor why I even needed them in the first place. 

In my rush to look the part, I made a number of rookie mistakes:

Neglected to carefully think through my selections.

Didn’t factor in quality.

Failed to consider the features.

Also, I didn’t even think through how I, personally, planned to use the piece of gear or tool I was purchasing.

With the various models available, these are crucial considerations to make sure the model you choose fits your current needs and any potential future needs you might have.  

Putting price of equipment above everything else (e.g., features, quality, current and future needs) was my rookie mistake.

Let’s take my first tripod, for example. I bought an inexpensive tripod that was around. (I considered it expensive at the time.) It included both the legs and a head that was attached to the tripod. My first professional use for that tripod was an interiors shoot. By that time, I had upgraded my camera to one that was heavier in weight.

When I got to the shoot, the head would not support the weight of that camera, so it wouldn’t stay in place. It kept tilting…which is NOT ideal for interior photography where you need the verticals (e.g., walls) to be straight. I had a lot of editing to do after the shoot. Needless to say, I only used it once. Talk about a waste of money! 

My first tripod definitely wouldn’t have cut it for flat lay photography. Had I known from the start that I was going to shoot flat lays, and anticipated that I would upgrade my camera and lenses to better quality ones, I could have saved up to buy the best tripod for my purposes. My goal with this post is to help you not make the same mistakes and to guide you with tips for flat lay photography in order to make the best decision for your needs when it comes to choosing a c-stand or tripod (or potentially both) for flat lay photography. But, first things first.

TIPS FOR FLAT LAY PHOTOGRAPHY: MY TOP 5 REASONS YOU NEED A C-STAND OR A TRIPOD!

If your goal is to shoot flat lays regularly, then having a c-stand or tripod really is a must, and here is why:

Ensures (along with a camera level) that your camera is directly overhead.

Allows your camera to maintain a consistent vantage point as you tweak your styling.

Eliminates camera shake (i.e., unintentionally blurry images) that is caused by shooting hand-held, especially when the shutter speed is slow.

Keeps your hands free to slide your hands in the shot.

Saves you from back pain from hunching over your scene while capturing the image.

TRIPOD VS. C-STAND: WHAT’S THE DIFFERENCE?

The main difference between a tripod and a c-stand relates to their primary and intended purposes. 

Most people are familiar with a tripod. It is a piece of photography equipment that is designed to stabilize your camera and is used in various genres of photography, from landscapes to portraits to products and food. 

On the other hand, a c-stand’s primary purpose is to hold or grip lights, scrims, reflectors and other accessories at various angles and distances to the set without getting in the way like a traditional light stand might. A c-stand also eliminates the need to have someone hold the reflector, for example, for you. Over time, photographers also began using c-stands to mount cameras for overhead shots or flat lays. 

A secondary difference is the way that the two are constructed. With a tripod, you extend the legs to get more height and widen them to get a more stable base. With a c-stand, the legs remain in place and low to the ground, and you adjust the body to get more height without compromising the stability.

WHY I SWITCHED TO A C-STAND FOR MY FLAT LAY STUDIO WORK

Reduction of Maximum Height

For a long time, I used this tripod for my flat lay photography. I love that it has a center column that I can position horizontally for overhead shots. Also, it is relatively lightweight and collapses to a small size, which is perfect for travel. At 6ft maximum height, I thought that it would be perfect for all of my needs. What I didn’t anticipate was that the height would be reduced to 4ft 8in if I used the center column horizontally and even more so (to 3ft 8in) if I widened the legs. This was fine for tighter shots but more problematic for wide ones.

You might ask, “Why widen the legs?” With a tripod, the legs go on the side of your setup. For some larger backdrops, you need to widen the legs so that the tripod doesn’t sit on top of your backdrop and cause potential damage. Also, widening the legs gives the tripod a more stable base so that it doesn’t tip as easily. 

The tripod legs got in the way

With the legs narrowed, I sometimes encountered a situation where the legs got in the shot, depending on the lens I was using. While I could compensate for this by switching to a longer lens, I like to make my lens choices based on the composition and image I have envisioned vs. logistical concerns. At other times, the legs would cast a shadow on my scene. If the legs were too close together, I found that I couldn’t position fill cards (e.g., white or black foam core) the way I wanted to bounce more light into the scene or block light from entering the scene.

For these reasons, I knew that I needed a different tripod option. However, my tripod already worked well for me in many ways. For example, it is perfect for 45 degree or straight-on shots as well as for interiors. It even works well for some flat lay images, especially if I am shooting a minimalist image with a long lens on a standard size (e.g., 18”x24”) backdrop. It is also highly portable and easy to take along with me when I deliver flat lay workshops at conferences. So, getting another tripod would only give me increased height and no other advantages.

IMPORTANT TIP FOR FLAT LAY PHOTOGRAPHY: ADVANTAGES OF A C-STAND OVER A TRIPOD

That’s where the c-stand comes in. In addition to the height advantage, a c-stand has the added versatility that I mentioned above in terms of holding lights and accessories. Plus, it has some additional advantages specifically for my flat lay photography. The primary reasons I prefer a c-stand include the ability to:

Get much higher above the scene:

This was important for shooting wider scenes as well as for using certain lenses (e.g., 85mm) that have a minimum focusing distance that was not conducive to the height of my tripod. If your camera is too close to your subject, the camera will not be able to lock focus, unless you use a macro lens.

The minimum height of my c-stand is approximately the same as the maximum height of my tripod. The maximum height of my c-stand is about 11ft, so I am now only limited by the height of my ceiling. Although the c-stand can extend far above my height, I don’t have to worry about reaching my camera because I shoot tethered to my laptop and control the settings from there. 

Set up two scenes simultaneously:

I am able to style one scene on the floor and another on a table. This works great when I have both a product shoot and a food shoot on my agenda. When I am ready to shoot the second scene, I just swivel the boom arm to the next surface area.

Leave my gear set up between shoots:

I don’t know about you, but having to break down and set up my gear every time I want to shoot is a bit annoying. I’d rather use those precious few minutes to begin styling my scene. No more tripping over my tripod legs or breaking the tripod down each time.

I keep my c-stand setup and just swivel the arm parallel to the wall or release the boom arm to rest vertically when I’m not using it. That way, I don’t bump my head on it and can walk freely around my office studio.

Slide large reflectors in on all sides for a bright and evenly lit photo:

Because of the triangular formation of the tripod legs and the length of my centre column, I was not able to position large pieces of foam core appropriately. 

Position myself to get my hands anywhere in the frame:

See reference image below. Without having to maneuver around the legs. I know longer have to practice being a contortionist.